Operator's Manual

Page 23
Chapter 4
Troubleshooti
ng
his chapter provides troubleshooting information you can
use in the unlikely event you have a problem with your
system. Customer Service information and merchandise
return instructions are included in this chapter.
Solving Problems
The following table identifies InstaScan Scanner and Dura-label
problems and provides suggestions for resolving the problem.
Table 2. Problem Solving
Problem Probable Cause Solution
The Power ON LED
does not light when you
turn on the scanner
The AC outlet may not
be working.
Plug another electrical
appliance, such as a
lamp, into the outlet and
turn it on. If the
appliance does not
work, plug the scanner
into a different outlet.
The AC outlet may be
controlled by a wall
switch.
Set the wall switch to
provide AC power to the
outlet, or use an outlet to
be controlled by a
switch.
T