Operator's Manual

Page 15

6. Type the following command and press Enter:

CHKREAD if using COM1 or CHKREAD /C 2 if using

COM2

A running series of zeros appear on your computer screen:

00 type <esc> to stop

00 Type <esc> to stop

7. Place the supplied Diagnostic Label in front of the antenna.

Do not place your finger over the Label. It should glow red

when powered. Removed Diagnostic Label from scanner

field.

8. Place an SCS Dura-label into the field. The Activity LED on

the InstaScan flickers and the display changes to a running

series of zeros and ones:

01 Type <esc> to stop

This indicates that the InstaScan is identifying Dura-labels

correctly and is ready for operation.

9. To exit CHKREAD, press the Esc key.