Manualshelf

Operator's Manual

ManualsBrandsSingle Chip Systems ManualsElectronicsModel S556 Scanner
11121314151617181920
Page 13
Connecting to an AC Outlet
The following procedure describes how to connect the InstaScan
to an AC Outlet.
1. Verify that the On/Off switch on the InstaScan front panel is
in the OFF position (see Figure 3).
2. Connect the power cord the front panel (see Figure 3).
3. Connect the other end of the power cord to an AC outlet.
4. Set the On/Off switch to the ON position. The Power ON
LED lights.