Operator's Manual

Page 11
Placing the Antenna
Antenna placement is critical to ensuring that information is
transmitted to and from Dura-labels accurately. Observe the
following guidelines when placing the antenna:
Locate the antenna away from metal objects, microwave
ovens, and other devices that may induce radio
frequency interference. In addition, make sure there are
no metallic surfaces between, or in relative proximity to,
the InstaScan and Dura-label. For additional placement
considerations, refer to “RF Communications” on page
19.
When reading, the InstaScan should be placed no more than 50
inches from the objects bearing the Dura-labels.
! Dura-labels must reside within the scan field for at least 10
milliseconds for information to be retrieved from them.