Operator's Manual

Page 8
Panel Information
The InstaScan’s front panel has three LEDs that indicate power,
activity, and transmitter on (see Figure 3). Table 1 describes the
meanings of the InstaScan LEDs.
The InstaScan’s front panel has an On/Off switch located below
the Power ON LED (see Figure 3).
In the ON position, the red Power ON LED should go
ON, indicating that the InstaScan is receiving power.
If the OFF position, the InstaScan is not receiving power,
even if the connected to the power outlet.
Table 1. InstaScan Scanner Led Meanings
LED Color Status
Power ON Red ON = InstaScan is turned on and
receiving power from an AC outlet.
Activity/Error Yellow Flicker = InstaScan detects Dura-
label information.
Constant Flickering with no Dura-
label in the scanning field = Noisy
environment or possible interface,
resulting in diminished Dura-label
reading.
Transmit Green ON = InstaScan transmitter is on.