Instruction Manual

— E8 —
Changing the Wireless Microphone’s Battery
When the wireless mic batteries are low
the battery indicator will flash. Change the
batteries as follows:
1
Unscrew the bottom of the wireless
microphone.
2
Replace the batteries with 2 x "AA"
size/LR6 battery.
3
Replace the bottom of the wireless
microphone and screw it back on.
Connections
Connecting the Wireless Microphone(s)
Press the / (ON/STANDBY/
LIGHTS) button to turn the unit on, the
Mic indicator 1 and 2 appear in display and
flash.
Slide the Wireless Mic’s ON/MUTE/OFF
u
switch to the ON position. The Mic
indicator 1 or 2 will light solid.
NOTES:
• Working distance of up to 30 feet/10
meters in open space.
• If there is no audio input for 15 minutes,
the wireless mics connection will
automatically turn off. Press and rotate
the MUSIC VOL/MIC VOL control to
reactivate the connection.
u
Battery Precautions
The precautions below should be followed when using batteries in
this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon Zinc) or old b
atteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged,
they can overheat and rupture. (Follow battery manufacturer’s
directions.)
6. Rechargeable batteries are to be removed from the product
before being charged.
7. Rechargeable b
atteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.