User guide

SECTION III

GETTING TO KNOW YOUR MACHINE

SELECTION OF THE STITCH:

STITCH LENGTH DIAL

This dial controls the forward feeding of the

fabric. At 0, the fabric is not fed at all. As

the numbers increase, so does the length of

the stitch. Turn the dial so that the

desired number is below the white guide

mark.

Note: Always set at 5 or the ^ mark when

the pattern selector is set at one of the

^ marks.

REVERSE BUTTON

If you wish to sew backwards to fasten the threads at the beginning or end of a seam, when

doing ordinary sewing, press in the Reverse Button as far as it will go so that your machine

sews in reverse at approximately the same stitch length as the forward stitch length. The

machine will sew in reverse as long as the button is held in.

Table showing the numbers on the stitch length dial and the actual number of stitches per

inch or length per stitch.

Numeral on the dial

Number of stitches per inch (approx.)

No Feeding

8 6