User guide

CHANGING THE FOOT
For most ordinary sewing the original
all-purpose foot can be used. How
ever, it is recommended to use the
following special feet in your
accessory box whenever you want a
better stitching result.
Straight Stitch Foot
This has only a narrow hole to accom
modate only straight stitching. It may
be used on sheer or soft fabrics for
more control.
Buttonhole Foot
This foot has a groove underneath, to
allow the narrow satin stitch or
buttonhole to form evenly. However,
if skip stitches occur on sheer fabrics
with this foot, it may be necessary to
use thin paper underneath.
Cording & Zipper Foot, and Button
Foot
Use for sewing very close to the edge
of a cord or zipper, and sewing on
buttons respectively.
Use the large screwdriver to loosen
thumb screw. Turn the screw back
ward until the foot becomes loose.
Then, lift up on presser foot lever until
it is in its highest position in order to
remove the foot. Replace with desired
foot and tighten thumb screw
securely.