Instructions / Assembly

8
HOw TO STEAM
Fill the Water Tank.•
Expand the Telescopic Pole by unlocking the clips and fully extending the •
pole. Lock clips to secure.
Plug in the power cord to a grounded electrical outlet and turn on the power •
at the ON/OFF switch. The Power Indicator Light will glow.
The unit will be ready to use in just 45 seconds.•
Hang the garment on the Rotating Hanger. You may also use a clean, rust-•
free clothes hanger, and place the hanger on the Clothes Hanger Hook.
Place the protective glove on the hand that will be holding the garment.•
Hold the Steam Head with the steam vents pointing away from your body.•
Touch the Steam Head to the garment lightly, moving it in an up and down •
vertical motion, beginning at the bottom of the garment and moving upward.
Steam will rise along the inside and outside of the fabric to remove wrinkles. •
Continue to steam the garment, smoothing with your free (gloved) hand.
Repeat until fabric is wrinkle free.•
When finished, switch the power off at the On/Off Switch. •
Unplug the steamer.•
Hang the Steam Head on the Steam Head Hanger when not in use. •
Empty the Water Tank before storing.•
ON
OFF