Instructions / Assembly

6
wARNINg: ALWAYS TURN OFF THE STEAMER BEFORE ATTACHING
ACCESSORIES TO AVOID INJURY.
Folding Hanger Assembly
Secure the Steam Head Hanger assembly to the Telescopic Pole. •
Tilt the hook of the Rotating Hanger and insert it into the hole on the flat side •
of the Steam Head Hanger. Press gently to lock.
Pull the arm of the Rotating Hanger up until the sides are completely extended.•
Lock the horizontal bar in place by aligning the dots on the bar. •
Garment Clips Assembly and Use
Snap the Garment Clips into the holes on the horizontal bar of the Folding Hanger. •
Clip the Garment Clip Bar to the bottom of the Telescopic Pole. •
To use, hang the garment from the top clips and secure with the bottom clips, •
pulling the garment taut to steam or crease.