User Manual

Power/light switch
Interruptor corriente/luz
SETTING UP YOUR MACHINE
Be sure to wipe off any surplus oil from needle plate area before using your machine the first time.
FOOT CONTROL POWER/LIGHT SWITCH
Connect the plug of the foot control Into the machine socket ® and Your machine will not operate until the power/light switch Is turned
your wall outlet (D as illustrated. on. The same switch controls both the power and the light.
When servicing the machine, or changing needles or lamps, etc.,
machine must be disconnected from the wall outlet.
PREPARACION DE LA MAQUINA
Asegurarse de limpiar cualquier aceite sobrante del área de la plancha de aguja, antes de usar, por primera vez, la máquina.
CONTROL POR PEDAL
Conecte el pedal a la máquina ® y el enchufe a la alimentación de
corriente (D tal como se ve en el dibujo.
INTERRUPTOR CORRIENTE/LUZ
La máquina no funcionará hasta que se conecte el interruptor de
corriente/luz. El mismo interruptor controla la corriente y la luz.
Cuando se está utilizando la máquina, o se están cambiando agujas
o bobinas, etc., la máquina se debe desconectar de los suministros
principales.