User's Manual

Chapter 5. Error Handling
5-8
Power Supply Interrupted during Printing
In case, power supply interrupted during the printing, Thermal Head will be kept
pushing to Platen. Laving this situation for a long time, shape of Platen can be warped.
In order to avoid this situation, please follow the instruction below.
1. Turn off the power of the printer.
2. Turn on the power for 3 or more seconds after turning off the power.
3. Paper Jam is displayed on the LCD of the operation panel, open the front cover
and take the necessary action according to the instruction provided in 5-3, "Paper
Jam".
When the ribbon is snapped
1. Remove the ribbon cassette.
2. Stick the broken part of the ribbon with a
tape.
3. Turn the ribbon on the rewinding side and
rewind the taped section completely.