User's Manual

Chapter 3. Operation Panel
3-1
Operation Panel
The buttons, LEDs and LCD display on the operation panel are shown below.
The LED Displays  to  have the following meanings
No.
Name Color Description

POWER Lamp Orange Light when power is ON.

READY Lamp Green Light when ready to print.

ERROR Lamp Red Light when error occurs.
Individual Operation Buttons  to  have the following function
№
Name Function
④
Menu Button
Pressing this button in ready state, the printer is set to a
User Set Up mode. (See page 3-3.) Use this button to
select an item in the menu.
⑤
+ Button Not used since the button is for maintenance.
⑥
－ Button
Not used since the button is for maintenance.
⑦
ENTER Button
Use this button to determine the selected setting contents
in User Set Up mode.
⑧
PAPER SET
Button
Pressing this button in ready state feeds a certain length
of paper to be cut to reset the paper to the set position.
⑨
PAPER
REWIND/CLEAR
Button
・Pressing this button in ready state , the paper is rewound
to the feeding unit.
・In User Set Up mode, control exits from the menu that is
displayed when this button is pressed.
⑩
①
②
③
⑤ ④ ⑧
⑥ ⑦ ⑨