User's Manual

Installing Program Modes
Valet Function
SPEAR 5000
8
9
General Remote Code Programming
※ After finish the car installation and power apply to the main unit,
programs can be input within 3 seconds.
▶ Leave the door open.
▶ Turn the key to ON position.
▶ Press valet button 4 times. Beep sounds 1 time.
▶ Press button then program is installed with one beep sound and one
parking light flash. If no input occurs within 7 seconds, programming will be
done.
▶ If you want to set up second remote, press button then program is
installed with two beep sounds.
Third remote can be programmed with same method. And beep sounds 3
times.
▶ You can program total three remotes (two of 2-way remotes first and then
one auxiliary remote).
1) Temporary valet: when parking, washing and maintaining the car
▶ Using valet button : Leave the door open. Turn the key to ON position. And
press valet button for 5 seconds.
Then temporary valet will work with one beep sound and one parking light
flash. In this mode, you can use door lock/ unlock function. If you repeat
same steps, this mode will be inactivated.
▶ Using remote controller : Leave the door open. Turn the key to ON position.
And press button for 2 seconds.
Then temporary valet will work with one beep sound and one parking light
flash. In this mode, you can use door lock/ unlock function. If you repeat
same steps, this mode will be inactivated.
2) Permanent valet : when you lost remote controller
(until you input programs to new remote)
▶ Leave the door open. Turn the key to ON position. And press valet button for
10 seconds. Then permanent alarm disarming will work with one beep sound
and one parking light flash.In this mode, you can not use any function until
you will use new remote. If you repeat same steps, this mode will be
inactivated.
▶ If you use new remote, first inactivate permanent valet mode and input
programs to new remote
(please see General Remote Code Programming instruction).
󳥰󳥰
󳥲
󳥰
Door open Key ON
Valet, 4 times
Beep, 1 time
󳥯 󳥯
※ Same former
procedures
Beep & parking light, 1 time button
Beep, 2 times
󳥰󳥰󳥰
Door open Key ON
S button, 2 sec
Beep & parking light, 1 time
󳥰󳥰󳥰
Door open
Key ON
Valet, 10 sec
Beep & parking light, 1 time
󳥰󳥰󳥰
Door open Key ON
Valet, 5 sec
Beep & parking light, 1 time
▼ Use valet button
▼ Use remote