User's Manual

11) Car voltage display
▶ Press and button consecutively to check car voltage.
12) Check DIP SW and current status activated
▶ Press and button consecutively to check current status.
Convenience & Optional Functions
SPEAR 5000
20
21
Screen
Screen
13) Functions when it installed (H/W)
▶Functions can be changed by DIP SW.
Choice
Off (↑)
Gasoline (5sec) General General
Turbo/ LPG Manual reserve
Auto reserve
MUSSO
Diesel (7sec)
On (↓)
1234
14) Customers can choose below when they install
15) Service centers can choose below for customers
16) Simultaneous siren and horn sound function
17) If shock and car interrupt happened, remote and car displayed
and indicated these
※ If battery is out of power, there will be no display in the screen and back light
will be on and off and remote will vibrate weakly.
---- Need to replace battery.
After door
open, turn
the key to
ON position
and press
valet button
6 times
(within 7
sec)
1 sec
1 sec
2 sec
2 sec
2 sec
Soundless mode -inactivate
Passive mode - inactivate
Silent mode (car off, remote on) - inactivate
Unlock auto door lock vehicle - inactivate
IG lock - inactivate
After door
open, turn
the key to
ON position
and press
valet button
8 times
(within 7
sec)
Extend cranking time, 1 sec (LPG cars) - inactivate
4 door/ 5 door - 5 door
Engine start recognize: noise (1 time)/ Slide SW: TACHO (2 times)
2 min (chirp, 1 time), 5 min (chirp, 2 times), 20 min (chirp, 3 times)
Factory installed
10) Car inside temperature display
▶ Press and button consecutively to check the voltage of car battery.
Screen
※ After replacing battery, please do this function to check
current status (replacing battery makes remote initialize
so adjust time related functions such as current time,
alarm notice and 24-hour engine start reserve function etc).
1 sec
1 sec
2 sec
2 sec
2 sec