User's Manual

Standard Functions
SPEAR 5000
12
13
4) Engine start function: press button for 2 seconds
(apply to both auto and manual transmission vehicles).
▶ Siren 1 time, parking light 1 time.
▶ In 3 seconds (7 seconds for diesel vehicles), engine will crank (in case of
failure, please try more 2 times).
▶ If engine starts, siren sounds 3 times and parking light flashes 3 times. If it
failed, beep sounds 2 times.
▶ In manual transmission vehicles, if you did not reserve engine start function,
siren will sound 3 times and parking light will flash long 1 time.
3) Trunk release: press button for 2 seconds.
▶ Trunk will be open
▶ Alarm will be disarmed
▶ Siren 2 times, parking light 2 times.
▶ In 10 seconds, back to alarm arming mode.
▶ 4 door mode: Before back to arming mode, if you open the door,
rearming will not work.
▶ 5 door mode: If you open the trunk, rearming will not work.
▶ In the screen of remote, trunk open displayed.
▶ Back lights of remote will be on (if you are not connected, beep will sound 3
times and no change of the screen and no back lights.)
▶ In the screen of remote, exhaust gas icon and engine start duration time displayed.
▶ If engine starts, remote will chirp 2 times and back lights will be on
(if you are not connected, beep will sound 3 times and no change of the screen
and no back lights.)
※ In manual transmission vehicles, if engine start function reserved, P icon is on
and off in the screen.
Trunk open
Screen Screen
󳥰󳥰
button
Beep & parking light,
2 times
▼ Trunk open
▼ Manual transmission vehicle
Engine start reserve in
manual transmission
󳥰
+
Do not reserve --> Parking light, 1 time long + Press button for 2 sec
󳥰󳥰󳥰
button Beep & parking light,
1 time
Engine crank in 3 sec
Beep & parking light,
3 times
Engine starting and duration time
in manual transmission