User Manual

PARAMETERS
Voices
1 .. 16
Number of layers in the chorus engine
Range
5 .. 25 ms
Chorus engine time range
Feedback
0 .. 100%
Chorus engine feedback amount
Low Cut
20 … 2000 Hz
Cutoff frequency of the input high-pass filter
Quality
Interpolation type used in the chorus engine:
– Lo-Fi: quantized linear interpolation (darker sound character with subtle
stepping and aliasing noise)
– Vintage: linear interpolation (darker, warmer sound character)
– Modern: spline interpolation (full quality with no artifacts)
Frequency
Rate
0.01 .. 10 Hz
1/16 .. 16/1
Modulation generator speed in Hertz (when the Sync switch is off)
Modulation generator speed as a host tempo fraction (when the Sync switch is on)
Sync
On / Off
Defines whether the modulation generator speed is set in Hertz or as a fraction of
the current host tempo; when this switch is on, the modulator phase is also being
continuously synchronized to the host transport location
Depth
0 .. 100 %
Amount of time modulation applied onto the chorus engine
Stereo
0 .. 100 %
Modulation generator phase offset between left and right channels
Output
0 .. 100 %
Wet output signal level of the chorus engine
Mix
0 .. 100 %
Balance between dry input and wet output