Specifications

Table of Contents
Section I – Safety Information Page
1.1 Safety Information 1.1
Section 2 – FCC Information
2.1 Part 68 Compliance 2.1
Section 3 – Installation
3.1 System Includes 3.1
3.2 Installing the System 3.1
Mechanical Installation 3.2
DAI-2 Relay Panel Interconnect 3.2
Telephone Line Connection 3.2
Audio I/O Connection 3.3
Logic-Level Input Connections 3.3
Manual Connect Input 3.4
Control Relay I/O Connections 3.4
Power Supply 3.4
3.3 Telephone Interface 3.5
Cellular Telephone with an RJ-11 Adapter 3.5
Fixed Location Cellular Telephones 3.5
Rural Radiotelephones or Ranch Telephones 3.5
3.4 Use with RPU Equipment 3.6
3.5 RF Interference 3.6
3.6 Lightning Protection Tips 3.7
Proper Ground System 3.7
Telephone Line Protection 3.7
Section 4 – Operation
4.1 Overview 4.1
4.2 Operation from a Remote Telephone 4.1
Going Online with the DAI-2 4.1
Issuing Commands 4.1
Shift Key Commands 4.1
Going Offline with the DAI-2 4.1
4.3 Operaton from a Local Telephone 4.2
Connect Button 4.2
Manual Connection with Telephone Lines 4.2
Manual Connection without Telephone Lines 4.3
4.4 Operation on a Shared Telephone Line 4.4
Transfer from a Dial-up Remote Control 4.4
Control via VHF or Microwave RPU 4.5
4.5 Command Sets 4.5
Command Set 0 -- User Defined 4.5
Command Set 1 -- Soundbite Recorder 4.6
Command Set 2 -- Remote Broadcaster 4.7
Command Set 3 -- Emergency Broadcaster 4.8
DAI-2 Table of Contents i