Quick Start Guide

9-5
Read this if You Have a Problem
9
2. WhentheTouchPanelisnotvisible
If a certain length of time has elapsed without any operations being carried out on this machine, the
TouchPanelmay turn off.
Check the following items:
●Touch the Touch Panel. In Power Save (Low Power/Sleep) mode, this machine returns from
Power Save mode when the Touch Panel is touched or a key on the Control Panel is pressed,
and the Touch Panel appears normally.
●On the Control Panel, press the Power key. If the Weekly Timer setting has put the machine in
Erp Auto Power off mode, press the Power key to display the TouchPanel. To use it outside the
preset operating hours, follow the on-screen instructions.
●Check to see that the Main Power Switch is turned ON.