Quick Start Guide

9-4
Read this if You Have a Problem
9
Return the original or paper, and tap [OK] or [Complete]; the system restarts scanning or printing of
the original.
Item Descriptions
[Start Guidance] Starts the guidance showing how to clear a paper/staple jam.
[Display Switch] Changes the screen that shows the paper jam clearing procedure and the
screen that shows where the paper jam occurred.
Number (indicating
the location number
for the section with
a paper/staple jam)
A section chart is displayed with a location number enclosed in a circle for a
section where a paper/staple jam has occurred.
1.3 When an error message appears
When an error is detected, the following message appears. Take the appropriate action according to
the message displayed on the screen. If you cannot resolve the error, write down the [TroubleCode],
and contact your service representative with the power plug disconnected from the power outlet.
In normal circumstances, the phone number and fax number for your service representative appear in
the center of the screen.
Notice
- If a defective part can be separated in order to be able to continue operations after a problem
has been detected, [Continue] or [RecoverData] is displayed. To continue operations,
select any key. However, the problem has not been resolved, so contact your service
representative imme diately.