Instructions

Printing
3-6
3
❖
Nozzle Cleaning
① This menu can be used to clean a nozzle manually if the filament does not come out of the nozzle for printing.
② Select a nozzle to clean.
③ Enter the temperature and press the
[OK]
button. Press the heating nozzle button to set the temperature of the
nozzle.
④ Press the
[1], [10], [50],
or
[100]
button to select the desired moving amount.
⑤ Press an arrow button to move the filament to a desired direction.
⑥ Press the
[Disconnect Nozzle]
and
[Disconnect]
buttons to disconnect the nozzles if they need to be cleaned.
❖ Bed Height Adjustment
① This menu is used to adjust the height of the bed during printing for a high-quality outcome.
② [Save] the adjusted bed height and return to the printing screen to print the adjusted bed height.
③ Press the [Reset] button to return the bed to its previous position.
❖ Extruder
It functions just like the extruder operation in your printer’s settings.
❖ Cartridge
The cartridge can be loaded, unloaded, or unlocked during printing.
7 Print Cancelation
During print pressing [Stop] button a message pops up and asks for confirmation on the print canceling.
When confirmed, the rest printing job is canceled.
Another message requesting the removable of left print will popup press [OK] and screen will return to home
screen.