Instructions

2-51
UI Menu Function
2
Menu Description
E-mail Address The sender info to be seen by the recipient(e.g. [e-mail])
The recipient can reply to this email address
Address SMTP server address (e.g. smtp.domain.com)
- This is the server address of the email service ([e-mail])
Port SMTP Server Port (e.g. 25)
- Normally the port number 25, 587 or 465 is used.
Due to the increased security, some service providers do not allow the use of port number
465. If port number 465 is not available, please use 25, 587 or the port number that the
service provider recommends.
ID SMTP server login ID (e.g. sender)
- Enter the ID for your email.
- Depending on the service provider, a full email address may be requested.
Please contact server administrator or email service provider for more information.
PW SMTP server login password (e.g. ********)
- Enter the password for your email.
Security Security method used when sending mail to SMTP server
- The default value is [None]. For further details, contact your server hosting company or
mail service provider.
Inquire your email server administrator or services provider for detailed information of the input information on each
category. Especially for SMTP server log in ID, it may be needed to enter the entire email address which includes the
domain name.
This setting is for the SMTP (Simple Mail Transfer Protocol) server to be used for sending emails. The SMTP setting
may have to be enabled depending on the system.
To check the detailed setting values, please refer to the setup information from your email service provider.
For the set up to use the outgoing email service, please find information by internet search or your email service
provider’s instructions.
A certain amount of interval time may be required after setting up the SMTP service before using. For more details,
please inquire your email provider for the service policies.
A certain amount of interval time may be required after setting up the SMTP service before using. For more details,
please inquire your email provider for the service policies.
4 Configure the recipient email information from the 3DWOX slicer program.