Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
UI Menu Function
2-50
2
❖ Time Setting
It shows the time of the current device, which can be changed by a user.
If set and the current times are different, it can be changed.
❖ Time Zone
The current time zone is displayed, and it can be changed by a user.
The current time zone is displayed, and it can be selected and changed by a user.
Once a time zone is set, the device will reboot to set the time zone.
❖ E-mail
The current printing state of the device will be captured and then e-mailed.
Configure the settings to send an e-mail from the 3DWOX device.
The device provides settings to send mails only, while information to receive mails can be set with the Slicer program.