Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
UI Menu Function
2-30
2
6 To print the pattern for the calibrating nozzle again, press the [Yes] button. Press the [No] button to return to the
Home screen.
Note
-
Generally, the use of PLA material is recommended when performing XY-Calibration. Inevitably, XY-Calibration
using ABS material is also possible.
After the calibration is complete, there may be remainders on the bed during the process of removing the
calibration pattern. (Pattern marks do not affect the function of the bed.)
▣ Entering the Pattern Value
1
Press the
[Nozzle Calibration]
button to access the Nozzle Calibration screen.