Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
UI Menu Function
2-14
2
6 After the filament has been removed, the screen will automatically turn to the [Unlock] screen to let the user
remove the cartridge.
UNLOCK
This Function is to remove the cartridge out of the printer. Cartridge unlock automatically initiates when
filament unload is finished. Cartridge unlock can also be manually done by the user.
❖
When unlock screen automatically appears after cartridge unload.
1 For 10 seconds [Lock] state is deactivated and the user can detach cartridge from printer. If the cartridge
can’t be pulled out even after “unlock”, gently push it forward and then try to pull out again.
2 After 10 seconds printer will automatically change to [Lock] state and [Unlock] appears.