Instructions

1-5
Preparations for Machine Operation
1
3. Understanding the Device Parts
1
6
8
7
9
10
2
3
5
4
<Front> <Rear>
11
No. Part Name Description
1 Front door handle A handle to open the front door.
2
USB port
Connect USB flash drive containing printing information and print directly from
USB flash drive.
3 LCD Control panel Screen used to control printer.
Caution
- Usage of printer is recommended after removing the protection film on LCD control panel.
If the film is not removed, the touch screen may not work properly.
4 Power Button
Briefly press this button to turn on printer.
Press and hold for 2 seconds to turn off the printer
Power Button Indicator Lamp On Power is On.
1 second interval flickering Can be turned on instantly.
(power cable is connected)
Caution
- If in case of not using the printer for long period of time,
please unplug the power cord.
- The lamp may flicker for a few seconds after the
power cord is disconnected.
Lamp Off Inactive Mode. (Power cord is unplugged)
5 Top door handle A handle to open top door.
6 Ventilator fan(Odor re-
moving filter)
Discharges heat from interior.
Filters out odor created through printing.
7 Lan Port Allows a device to connect to a network using a LAN cable.
8 USB Port Used to connect printer to computer with a USB cable.
9 Power port Power cord connector.
10 Carrying Handles Handles to use when moving the printer.
11 Extruder door Door for maintaining extruder unit.
12 Nozzle tube guiding rod Prevents the nozzle tube from twisting.
13 Main power switch (l /O) Turn the power on or off by pressing “I” (ON) or “O” (OFF).
12
13