Instructions

13
Before using the Machine
❖
WLAN Notice
Exposure to radio frequency radiation
The following notice is applicable if your printer has a wireless network card installed.
The radiated output power of this device is far below the FCC radio frequency exposure limits.
   Aminimumclearanceof20cm(8inches)mustbemaintainedbetweentheantennaandanypersonsfor
this device to satisfy the RF exposure requirements of the FCC.
❖
Power Consumption
Power Consumption of the Products
The below table shows power consumption.
Mode Description Power Consumption(W)
Printing A device is printing using electronic input data. Max. 1000W
Standby A device is in standby mode. Max. 750W
Power On A power plug is plugged into the outlet with the machine’s
switch on.
15W
Power Off A power plug is plugged into the outlet with the machine’s
switch off .
0.5W
The above power consumption is the hourly average value.
Instant power consumption can be much higher than the average value.
Deactivated Mode
The machine consumes power even in the deactivated mode. Unplug the power cord to completely stop the
power consumption.
Total Energy Usage
It would be useful to calculate the Total energy usage of the machine.
Since the electricity bill is charged in Watt unit, you have to multiply time spent in each mode by power
consumption in order to calculate the energy use.
Total energy usage is the sum of energy used in each mode.
Condensation
Dramatic change of the ambient temperature may produces water droplets on the interior and exterior of the
machine.
Wipe the water droplets on the outer surface, but for the inside please let them dry off by leaving front
door and cover opened.