Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
Appendix
6-10
6
Important
-
To return to the Cartridge mode, carry out the following procedure:
Install the tube guiding rod at the original position.
Remove the cleaning tubes that were inserted into the nozzles, then reconnect the existing tubes.
In reconnecting the existing tubes to the nozzles, make sure that the tubes span on the guiding rod.
Connect the left tube to the left nozzle then the right tube to the right nozzle.
Move the nozzle to the front of machine, and assemble the tube as shown below.
( O ) ( X )