Instructions

Before using the Machine
8
5. Consumables Handling
Warning
- Do not burn the Cartridge unit or filament. It may be a cause of big fire or burn by ignition.
Caution
- Keep them out of the reach of children.
- If skin irritation occurs after touching the filament, please see a doctor.
Important
- Do not keep the cartridge unit in the following places.
󱇱
Exposed to fire
󱇱
Exposed to direct sunlight;
󱇱
Where temperature or humidity may rise;
󱇱
Where sharp change of temperature may occur;
󱇱
Covered with dust;
󱇱
Inside a vehicle for extended time.
- Keep cartridges away from physical impact or vibration.
- Do not unpack cartridges until you are just ready to use them.
5.1 PLA
It is a material that can be easily printed by the users using the 3D printer for the first time. You can easily print va-
rious colors and complex shapes. Ambient temperatures above 50 ° C can cause material properties to change,
causing the material to expand or scatter. PVA can be used as a support material.
Nozzle temperature: 200 ° C
Bed temperature: 55 ° C
Recommended direction of the bed : Side A
Color: White, Black, Gray, Red, Yellow, Green, Blue, Pink, Purple
Storage : Store in cartridges with the silica gel that was included in the purchase.
5.2 ABS
Widely used in 3D printers, it has more rigidity and heat resistance than PLA. Due to the high temperature of the
nozzle and the air when printing, printing are not available with other materials. ABS material can be deformed by
shrinkage when the temperature in the cabin drops during printing. Particularly when printing a wide output surface to
the bed, shrinkage may occur at the corners.
IfprintingABSmaterialonSideAofthebedsheet,thePrintedOutputmaynotdetachedfromthebedsheeteasily.
It is recommended to using Side B of the bed sheet when printing ABS material.
(IfusingSideBonthebedsheet,adjusttheprofileintheslicerprogramtocreateaG-code.)
Nozzle temperature: 230 ° C
Bed temperature:90°C(SideA),100°C(SideB)
Color: white, black, gray, red, yellow, green, blue
Storage: Store in cartridges with the silica gel that was included in the purchase.