Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
6-3
Appendix
6
2. Using an open material
Note
-
For setting the product on using an open material, see p. 2–39, “Open material.”
-
In the case of the 7X model, you can select a position to insert the spool during the setting of the Open
Material mode.
If you are to use any soft or brittle material, make sure to select [Top].
2.1 Installing from the front
1
On the Home window, click the
[Spool]
button.
2
Select the filament to be activated by clicking either
[Filament 1]
or
[Filament 2]
.