Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
Maintenance
5-18
5
4 A persistent Notification 401, 601 error code may be caused by an insufficient space between the nozzle and the
bed, which causes the filament not to be correctly transferred.
In such a case, select the [Bed Height Adjustment] menu to adjust the height of the bed so that there is adequate
space between the nozzle and the bed.
※You can also cancel printing and re-execute
[Setting]–[Bed Leveling]
to set the correct space between the
nozzle and the bed.
5 After finishing the response to Notice 401, 601 press the [Resume] button to continue printing.