Instructions

7
Before using the Machine
4.3 Power Switch
Before turning the power switch on, check that the power cord is connected to the socket tightly. Then, turn the power
 onbypushthepowerswitchto“│”(ON)positionattherightonrearsideoftheMachine.Toturnthepoweroff,push
 thepowerswitchto“○”(OFF)position.
 │for“ON”IEC60417-5007(DB:2002-10)
 ○for“OFF”IEC60417-5008(DB:2002-10)
The Switch used for this machine meets the requirements on the symbols and complies with its standard. But the
 horizontalstraightbarismeaningthePower“ON”becauseitsorientationisturned90ºtothecounterclockwise.Plea
 sedon’tconfusethemeaningofthehorizontalstraightbar“─”.
Switch standard
IEC 61058-1
 Symbolforthe“OFF”positionorthedirectionofactuationtothe“OFF”position–circle,○
 Symbolforthe“ON”positionorthedirectionofactuationtothe“ON”position-straightbar,│
Warning
- Do not plug or unplug the power cord or touch the power switch with wet hands. It may cause an
electrical shock.
Important
-  Onceyouturnthepoweroff,wait5secondsorlongertoturnthepoweronagain.
- If you are not using the device for a long time or if you are moving the device, turn the power off and unplug the
power cord from the outlet.