Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
5-7
Maintenance
5
7 Remove the tube for cleaning and then pull out the PLA filament.
8 Press the [Disconnect Nozzle] - [Disconnect] buttons to remove the nozzle.
As shown in the image, insert a nozzle cleaning tool into the top hole to remove dirt.
Caution
-
When you pull out the filament, if you can not pull it out well, please heat the nozzle after removing it.
1