Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
Maintenance
5-6
5
6 Enter the temperature and press the [OK] button. Press the heating nozzle button to set the temperature of the
nozzle. Once the target temperature is reached, put a PLA filament into the tube and make it come through the
nozzle.
Note
-
Use a white PLA filament longer than 50cm for cleaning.
-
Use a white PLA filament to distinguish dirt from the nozzle easily.
-
Filaments have different characteristics based on their colors. If you pull out a filament other than the white one,
it may break inside the nozzle.
White PLA