Instructions
Table Of Contents
- 3DWOX 5x/7x/ USER MANUAL
- Safety Instructions
- Before use
- Prohibition and limitation
- Contents
- Before using the Machine
- Chapter 1 Preparations forMachine Operation
- Chapter 2 UI Menu Function
- Chapter 3 Printing
- Chapter 4 Printed Output Check
- Chapter 5 Maintenance
- Chapter 6 Appendix
- Notice to Users
Printing
3-8
3
Reference
-
Methods of removing printables refer to P. 4-2 “1. Printed Output Check”.
1.2 Printing Via PC
1 Prepare PC connected to the same network where the printer is connected to.
2 Run 3DWOX Slicer program.
3 Press the [Print] button.
4 Following Steps (Same as steps 3~9 of printing via USB)
Note
-
Pause, print cancelation, please refer to P.3-2 Printing from USB Flash Drive.
-
Refer to “3DWOX Desktop Manual” for the details.
1.3 CLOUD Printing
To begin using the Cloud Print function, users must register the printer to the server.
1
On the Home window, click the
[Cloud]
button.
- When the user clicks [CLOUD] on the Home screen, the available CLOUD App is listed.