Technical data

7
- Additional weight
The weight of the Bravo® Stripper is as low as possible for easy handling and
transport. To be able to work efficiently, the machine comes with an additional
weight. Set the additional weight onto the front part of the machine until it locks at the
collateral bolt heads.
- Information about various floorings
Main applications of the Bravo® Stripper are carpets with foam backing,
CV-floorings, PVC-floorings and light carpets.
CV-floorings, PVC-floorings and carpets without foam backing
Cut strips according to the blade width. Check from time to time if the blade is
straight.
Carpets with foam backing
Use sharp blades only! Remove upper layer with carpet clamp. Remove the foam
backing with the stripper. Remove foam across the width if you have an uneven sub-
floor.
Semi-flexible tiles
These tiles can be removed without pre-cutting, if they are not bonded extremely tight.
- Trouble shooting
Trouble Eventual cause Elimination
Machine does not - Power supply Have machine
start disconnected repaired by a
qualified
- blown fuse electrician,
- defective cable resp. change parts
- defective plug
Undue force Blade is blunt Change blades
necessary to strip
the flooring
Excessive vibration Expendable parts are Return machine for
worn out service and/or repair.