Owner`s manual

20
Place of installation
Outdoor unit
 Outdoor unit can be installed on any place outside, which can carry the weight of this heavy unit as
e.g. terraces, terrain etc.
 Place of installation must be protected against influences of heat or fire.
 It is recommended to use protective covers or roofs to protect the unit against snow in winter.
 Areas of heat pump air input and output must not be blocked by any obstacles.
 Drainage channel must be built around the unit to drain condensate water. See Method of
installation.
 Place of installation must be protected against strong air blowing.
 There must be space enough left around the unit for maintenance and service work.
WARNING
Danger of injury due to ice formation!
The air coming out from the outdoor unit is colder than outdoor temperature. Therefore ice can be formed by
temperatures below 5 °C. This ice represents a danger of slipping.
WARNING
Danger of damage or malfunction due to a blown snow!
Areas of air input and output must remain free of obstacles in order to guarantee sufficient and not hindered
air blow.
Outdoor unit must be installed in a distance at least 3 m from public roads.
• Please ensure locally common and by law determined minimum distances are kept to the following
objects: vegetation, canvas, walls, open fire and heat radiation, places where children can play.
• Please keep air input and output of outdoor unit free of frost.
• Operation of outdoor unit emits a certain level of noise, which can become stronger on hard
surfaces; therefore place of installation must be chosen very carefully. (These value are dependent
on heat pump performance).