Owner`s manual

8
Transportation
Please transport the unit always in the upright position. Do not lay it on its side, otherwise some internal
parts could be damaged. During transportation and loading down avoid any sudden movements. When
moving, touch the unit always on its base part. When using a fork lift, use always a protective block between
the forks so that there is no damage to the unit and its covers. This protective block must be along the entire
width of the unit.
If it is necessary to lift the unit during the installation, it is
necessary to use a rope 8 m long and to insert some soft
protective material between rope and the unit to prevent
damage of covers. See the picture to the right. Fork lift can be
use to lift the unit too, as the package has a strong wooden base.
PROHIBITION
DO NOT TOUCH heat exchanger with your fingers and other
objects!
Inspection and storage
Upon delivery it is necessary to see the packing list and check all items, if the delivery is complete.
It is also necessary to check, if there is no damage on any delivered part.
When there is any damage, please inform transportation company immediately. After unit acceptance the
manufacturer takes no responsibilities for any damage during transportation.
WARNING!
Sharp edges and exchanger surface can cause injury. Please do not touch these parts.