Service manual

Remove panel parts

Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly. Do not scratch the outer parts.

Step Illustration Handling Instruction

Remove

panel parts

●Remove the screws shown

by the arrow in the graph with

screwdriver (two on both right

and left and 4 in the front) and

then remove the panel parts.

Remove sub-assy of electric box

Remark: Make sure that the power supply is cut off before disassembling and protect all the parts

during disassembly, especially the components inside the box in case of water and hit.

Step Illustration Handling Instruction

1. Remove electric

box cover

●Remove 3 screws as

shown by the arrow in the

graph on left and remove

the electric box cover.

Remove air deecting plate modules

Remark: Make sure the power supply is cut off before disassembling and protect all the

parts during disassembly, especially the joints of the air deecting plate.

Step Illustration Handling Instruction

Remove sub-

assy of air

deecting plate

●Remove the air deecting

plates from the air deecting

plate support assembly, and

then remove both ends from

the air sweeping motor joint.

(As is shown in the graph,

arrow represents the support

assembly and circle the air

sweeping motor joint.)