Service manual

49
4�3 Installation of Floor Ceiling Type
4.3.1 Before Installation
Check if there is any damage to the indoor unit, and the wireless controller and other part and components are
prepared completely.
4.3.2 Installation Site
Selection of Installation Location for Air Conditioner Unit
The installation of air conditioner unit must be in accordance with national and local safety codes.
Installation quality will directly affect the normal use of air conditioner unit. The user is prohibited
from installation by himself. Please contact your dealer after buying this machine. Professional
installation workers will provide installation and test services according to installation manual.
Do not connect to power until all installation work is completed.
Selection of Installation Location
◆
Such a place where cool air can be distributed throughout the room.
◆
Such a place where is condensation water is easily drained out.
◆
Such a place that can handle the weight of indoor unit.
◆
Such a place, which has easy access for maintenance.
◆
Such a place where is permitting easy connection with the outdoor unit.
◆
Such a place where is 1m or more away from other electric appliances such as television, audio device, etc.
◆
Avoid a location where there is heat source, high humidity or inammable gas.
◆
Do not use the unit in the immediate surroundings of a laundry, a bath, a shower or a swimming pool.
◆
Be sure that the installation conforms to the installation dimension diagram.
4.3.3 Dimension Data
When installing the indoor unit, you can refer the paper pattern for installation, and make sure that the drainage side
must be 10mm lower than the other side in order to drain the condensation water uently.
Unit:mm
A
B
C
D
H
Model A B H C D
MC-F09AI
1220 225 700 1158 280
MC-F12AI
MC-F18AI
4.3.4 Installation Clearance Data
a. Space dimension for installation of the unit
The space around the unit is adequate for ventilation .
47