Installation manual
Page 40
Lifting Action Ofce Series 2 & 3
The primary difference between Series 1 and 2 is that the latter incorporates the base covers and
electrical tracks into the panel system. The base covers are wider than the panel and everything lifts
when the panel system is raised. Be aware of the fact that base covers become dislodged easily. Lifting
under the large base cover is not recommended since it is both hollow and fragile. Insert the universal
clip into the slotted channel above the base cover (the jack will require the shaft extension due to the
height of the base cover). Remember to turn the stabilizing head to meet the panel. Most of the channel
slots on both Series 2 and 3 are still curved.
Series 3 panels are the same except the base covers are taller and narrower. The channel slots may be
straight (as opposed to curve). The same lift procedures apply using the lift system universal clips.
Tools Required for lifting Action Ofce:
06 Jacks
07 Universal Clips (Centers, Left and Right)
02 Universal Shoes
03 Shaft Extensions
Other Tools Required:
Scraper Bars
Furniture Skates