Installation manual

Page 29
Assembly Unit:
Normally consists of a desk/credenza unit
with overhead unit attached.
Cantilevers:
Support brackets under worksurfaces
or other panel supported elements.
Glide:
Used to level panel systems/les/peds/desks
Panel, Non-Tackable:
This would indicate that the panel would be
a hard surface even if it had fabric.
Panel, Tackable Acoustical:
Fabric-covered with a soft core that allows
for sound absorption and tacking or hanging
things on.
End panels:
These are used as a option to support worksurfaces.
Some times they can attach to panels, make sure
these are re-attached after lift.