User manual

28
REPAIRS
A-bike Plus User Manual
29
REPAIRS
Enlarged N
N
Enlarged N
Pliers
Cap
Cap
Use M5 wrench to
unscrew the nut.
PULL
Unscrew
4. Unscrew fasteners 'a' and 'b' by using 2.5 mm Allen key.
2.5 mm Allen key
a
b
Cap
Cap
Enlarged N
1. Detach the cap from the cable end by using pliers. (Note: The cap can be reused)
2. Unscrew the nut until the cable can slide freely.
3. Slide the brake band out until the brake
cable is completely withdrawn.
Replacing the brake band
As the brake bands are used they slowly wear, it is important that
they are replaced to maintain brake performance and safety.
b
a
Screw x 2pcs
Spring washer x 2pcs
washer x 2pcs
Enlarged N
Take down
Cap
Cap
Worn
brake
band
washer x 2pcs
Spring washer x 2pcs
Screw x 2pcs
a
b
New
brake
band
5. Replace the worn brake band
with a new brake band.
Enlarged N
Screw
Spring washer
washer
Cap
6. Assemble back fasteners 'a' and
'b'. Make sure the screw is passing
thought a spring washer followed by the plain washer.
a
b
Cap