User manual

26
REPAIRS
A-bike Plus User Manual
27
REPAIRS
Replacing a tyre or puncture repair
1. Remove the wheel as shown in the
previous pages.
2. Remove the dust cap from the
valve and release the remaining air
from it by pushing the centre pin in.
3. Use PLASTIC tyre levers to
remove the tyre.
Take the tube out of the tyre and
repair the puncture with a puncture
repair kit or simply replace inner
tube/tyre. When repairing a puncture,
follow the puncture repair kit’s manu-
facturer’s instructions. Only use tubes
and tyres sourced from your A-bike Plus supplier.
VERY IMPORTANT: When reas-
sembling always make sure the valve
on the tube faces clockwise, and tyre
tread faces the correct direction. Inflate
tyre to 90 psi (6.2 bar).
Note: Using tubes not designed for the A-bike Plus wheel hubs
could result in the valve jamming when riding. This could lead to
serious injury. Only use tubes designed for the A-bike Plus and
ensure these fitting instructions are followed.
Fixing a puncture (3)