User manual

A-bike Plus User Manual

SETTING UP

Unfolding the bike

Please also refer to the illustrated photo guide which can be found

inside the front cover of this user manual.

Trapped fingers

Fold and unfold the bike slowly and take care to avoid trapping

fingers, especially when dealing with the pedals.

It is important to follow each step in the correct order, the bike does

not need a lot of force to be unfolded and can be done in as little as

10 seconds.

1. Lift the Left and Right Handle Bar

ends up to the horizontal position and

slide them into the centre portion.

Check that both locking buttons are

fully engaged.

2a. Check BOTH quick release

clamps are unlocked.

2b. Raise seat post to horizontal

position.

Raise seat post to

horizontal position

Check BOTH quick release

clamps are unlocked

3. Grasp handlebar stem and rear leg as shown and extend legs until

all FOUR quick release buttons are locked.

4. Rotate the Handle Bars 180° clockwise

(looking from the top). DO not force it in the

wrong direction as this will wrap the brake

cable around the stem of the hadelbars and

damage the bike.

5. Lock both quick release clamps.

Quick release levers and locking buttons

When opening the bike ensure that the locking buttons pop out. The

two quick release levers here should be hand tight and firm.