User manual

The Web Interface sinaCAM
42 Rev.: E User Manual
10. The Web Interface
10.1 Getting Started
10.1.1 Required Tools
1. PC with one available Ethernet port or a local Ethernet connection
2. Web browser
3. sinaCAM update package (e.g., SinaCam_1.0_1575.pkg)
Note: The latest firm- and software updates can be downloaded from: www.sinacam.eu/support/
10.1.2 Connecting to sinaCAM
 Start the web browser.
 Use an Ethernet cable to connect the sinaCAM to the PC itself or to the local Ethernet network the
PC is operating in. Make sure one of the following are supported:
– DHCP
– Zero configuration networking for ad-hoc networking
 Switch on the sinaCAM.
 Look up the sinaCAM IP address in the sinaCAM menu SYSTEM.
 Crosscheck the IP addresses of sinaCAM vs. PC  Both shall be in the same subnet.
 Enter the sinaCAM IP address into the web browser’s address field.
 Log in with the username eddy and the password 99999999.
Figure 34: Web Manager - Login