User manual

Installation sinaCAM
16 Rev.: E User Manual
7.6 Connecting AUX Devices
The 10-pin AUX terminal enables the connection of a remote control unit, iris control devices, timecode
signals or an exposure trigger signal.
7.6.1 Pin Assignment of the 10-Pin AUX Terminal
Figure 5: Pin Assignment of the 10-Pin AUX Terminal
Table 6: Pin Assignment of the 10-Pin AUX Terminal
Pin no.
Assignment
1
5 V out
2
GND
3
TxD (RS-232) or Tx+ (RS-485)
4
RxD (RS-232) or Rx+ (RS-485)
5
Trigger Out
6
Iris Control (PWM)
7
Trigger In
8
Timecode In
9
CTS (RS-232) or Rx- (RS-485)
10
RTS (RS-232) or Tx- (RS-485)
Connector type:
ODU MINI-SNAP G51L0C-P10QC00-A000
Mating connector:
E.g., ODU MINI-SNAP S11L0C-P10MCC0-6200