Specifications

sinaCAM Description

Quick Start Guide Rev.: 1.2 (A) 9

6.2.2 The Rear Panel

Figure 4:

Arrangement of the Terminals

Table 5:

Terminals on the Rear Panel

Item Designation Description

A Remote head

terminals

(1, 2)

CoaXPress interface with 18 V power supply for

the remote camera heads, connection via 75 ohms

coaxial cable with BNC plug

B SYNC

(OUT, IN)

Terminals for, e.g.

 an additional camera

 an external sync generator

C HD-SDI output

(1A, 1B)

Terminals for, e.g., a HD-SDI monitor, a recording

device or a 2D/3D converter; 1A/1B provides the

image signal coming from remote head terminal 1

D HD-SDI output

(2A, 2B)

For the same equipment as listed next to item C;

2A/2B provides the image signal coming from

remote head terminal 2

E LAN 100 MBit Ethernet service communication port

F DVI output Connection of a digital HD monitor

G AUX 10-pin terminal, auxiliary signals for remote con-

trol unit, timecode or exposure trigger

H Power input

12 – 24 V

Connection of a power supply adapter,

12 – 24 V DC, minimum 30 W

HFE