Specifications

Technical Specifications sinaCAM
14 Rev.: 1.2 (A) Quick Start Guide
10. Technical Specifications
Remote Head HDC1-100
Image Sensor 2/3” Single Chip Kodak CCD Sensor (RGB)
2004x1144 Pixels, Progressive Scan
Sensitivity 2000 Lux @ f 8.0 / 0 dB Gain (100% video out)
160 Lux @ f 2.2 / 0 dB Gain (100% video out)
Resolution 1920x1080 Pixels
Dynamic Range 13.5 f-stops
Signal/Noise Ratio 64 dB @ 0 dB Gain
Interface CoaXPress, 75 ohms BNC Cable
Max. Cable Lengths 80 m (260 ft) with Standard BNC Cable
180 m (590 ft) with Gepco VHD1100 Cable (Option)
Lens Mount C-mount with Flange Back Distance adjustment
Power Consumption 4.6 W max.
Operating Temperature
Range
0 to 45 °C (32 to 113 °F)
Base Unit HDC1-200
Digital Signal Processing Single Chip DSP (dual 14-Bit)
White Balance Modes AWB: Automatic White Balance (Push to set White
Balance)
3200 K, 4300 K, 5600 K, 6500 K
MAN: Manual White Balance (red and blue adjust)
Black Level adjustable
Exposure Control 200, 400, 800 ASA
Gamma REC 709, S-Log, custom via web interface
Electronic Shutter Full Frame, 1/50 s to 1/5000 s
Remote Head
Connections
CoaXPress (via 75 ohms BNC Cable)
Output Signals up to 4x HD-SDI (SMPTE 292M, 372M)
DVI (Digital Monitor Output 1920x1080 @ 60Hz)