User's Manual

1. Press the MENU button and the menu will show.
2. Press the LEFT button or RIGHT button until the
vox icon is highlighted, then press the UP button or
DOWN button to select desired level. Press the OK
button to confirm.
3.Back to previous menu and Press the UP button or
DOWN button until the time icon is highlighted, then
press the OK button and the menu will show.
4. Press the UP button or DOWN button to select desired
time and get into the VOX mode.
5. Press the MENU button to exit.
1. Press the MENU button and the menu bar will show
2. Press the LEFT button or RIGHT button until the
alarm icon is highlighted.
3. Press the UP button or DOWN button to select the desired
time from 2h, 4h, 6h and OFF. (The default setting is OFF).
Press the OK button to confirm.
Long press the OK button to zoom in then press the OK
button to zoom out.
At the zoom mode, press the LEFT button to pan left.Press
the RIGHT button to pan right. Press the UP button to tilt
up. Press the DOWN button to tilt down. During zoom mode
(the zoom icon will be displayed on the top of the screen).
To talk, press and hold the TALK button on the front of the
monitor. Release the button when you have finished talking and
listening to the sound from the baby's room again. Bear in mind
that you will not be able to listen to your baby whilst talking to
the monitor. You will have to stop pressing this button when
listening to your baby. When you are using this function, the
talk icon will be displayed on the top of the screen.
1. Press the MENU button and the menu bar will show
2. Press the LEFT button or RIGHT button until the
cam icon is highlighted and the del/add/view/scan menu
will show.
3. Press the UP button or DOWN button to select the
view icon, and press the OK button to confirm.
4. cam 1/ cam 2/cam 3/cam 4 will show, press the UP
button or DOWN button to select the desired camera
unit to view.
Place the baby monitor away from heat sources such as
radiators , chimneys, cookers and direct sunlight.
Place the camera unit away from TV sets, microwave oven and
radios. The intense radio signals generated by these elements
could cause noise or even deteriorate sounds and images which
appear on the monitor. If this occurs, move the camera to
another location.
4.1.6 Infrared Night Vision (Automatic)
The infrared night vision function allows the camera to pick up
images of your baby or the monitored area in dark or low light
conditions. When using the night vision mode, only black and
white images will be displayed on the monitor. (When the
camera is in night vision mode, the night vision icon will be
displayed on the top of the screen).
Place the camera within 15 feet of the area being monitored
for best picture result.
NOTE:
3.3 Registration (Pairing)
The camera unit is pre-registered to your monitor unit. You do
not need to register it again unless the camera unit loses its
pairing with the monitor unit. To re-register your camera unit,
or register a new camera unit, follow the procedure below:
1. Press the MENU button of the monitor unit and the
menu bar will show.
2. Press the LEFT button or RIGHT button until cam
icon is highlighted.
3. Press the UP button or DOWN button until ADD icon is
highlighted and press the OK button.
4. Press the UP button or DOWN button to select the
desired cam and press the OK button to start searching
for a camera unit.
5. Press and hold the PAIR button in the back of the camera
unit for at least 3 seconds. The power LED light should
flash to indicate the camera unit is in pairing mode. If
it does not flash press and hold the PAIR button until the
LED light flashes.
If a particular camera unit was previously registered with
another monitor unit, registering with the current monitor
unit will overwrite the old registration on the camera unit.
4.2.1 Lullaby Setting
1. Press the MENU button and the menu will show.
2. Press the LEFT button or RIGHT button until the
lullaby icon is highlighted.
3. Press the UP button or DOWN button to select one of
the 6 available lullabies, single or sequential playing.
4. Press the MENU button to Exit.
NOTE:
Once the lullaby starts playing on, the lullaby icon will
display on the top of the screen.
Single playing will last 15 minutes each time.
Lullaby sequential playing function will play all the
lullabies each time.
4.2 Menu Operation
3. Press the UP button or DOWN button until the
add icon is highlighted and press the OK button.
4. Press the UP button or DOWN button to select the
desired cam and press the OK button to start searching
for a camera unit.
5. Press and hold the PAIR button on the back of the camera
unit for at least 3 seconds. The power LED light should flash
to indicate the camera unit is in pairing mode. If it does not
flash, press and hold the PAIR button until the LED light
flashes.
1. Press the MENU button and the menu bar will show
2. Press the LEFT button or RIGHT button until the
cam icon is highlighted and the del/add/view/scan menu
will show.
3. Press the UP button or DOWN button to select the
delect icon, and press the OK button to confirm.
4. cam 1/ cam 2/cam 3/ cam 4 will show, press the UP
button or DOWN button to select the desired cam, and
press the OK button to delete that registration on your
monitor unit.
4.2.4 Camera Control
4.2.4.2 Delete a Camera
4.2.4.1 Add (Pair) a Camera
NOTE:
A cam channel needs to be deleted before pairing to a
new camera unit.
1. Press the MENU button of the monitor unit and the
menu bar will show.
2. Press the LEFT button or RIGHT button until the
cam icon is highlighted.
4.2.4.3 View a Camera
If a particular camera unit was previously registered with
another monitor unit, registering with the current monitor
unit will overwrite the old registration on the camera unit.
4.2.3 VOX Setting
NOTE:
VOX-L is low sensitivity level.
VOX-H is high sensitivity level.
This mode allows you to control the sound activation of your
baby monitor. If there is no sound around the camera within 30
seconds or 60 seconds, it will stop the transmission. The
monitor screen will turn off when the camera is not transmit-
ting. When the camera detects the sound exceeding the
sensitivity level, it will start transmitting the signal to the
monitor and alert the user. To change the VOX level, please
follow the instructions on the next page:
VOX
-08- -09- -10- -11-
-12- -13- -14- -15-
3.1.2 Turn on the Monitor Unit
3.2 Placement of the Baby Monitor
*Only use the DC adapter included in this package.
*The monitor unit is supplied with a built-in rechargeable
Li-ion battery.
We suggest to connect the monitor to the adapter plugged
into the mains whenever possible, in order to keep the battery
charged.
Press and hold the POWER button on the right side of
the monitor unit.
Once monitor unit turned on, the power LED will light up and
the image will display on the LCD screen.
This camera can be placed on a tabletop or hung on the wall.
Place the baby monitor in a place where the air can circulate
freely. Do not place on soft quilts or blankets or in the corners
of cupboards, shelves, etc.
4.Using the Simyke U0s Baby Monitor
4.1.1 Power Save/Screen Off/Sleep Mode
4.1.2 Volume Adjustment
4.1.3 Brightness Adjustment
4.1.4 Digital Zoom & Pan/Tilt
4.1.5 Talk to Baby
Press the POWER button to get into the sleep mode.
Long press the POWER button to turn on /off the screen.
Press the RIGHT button to increase the volume.
Press the LEFT button to decrease the volume.
Press the UP button to increase the brightness.
Press the DOWN button to decrease the brightness.
NOTE:
If you want to adjust the volume/brightness, you
have to exit the zoom mode before you operate it.
4.1 OSD Mode Operation
Web:www.simyke.net
Baby monitors and cameras with power cords should never
be hung on or near the crib as it can cause strangulation
hazard. Power cords should be kept no less than 3 ft away
from the crib and the baby's reach at all times.
4.2.2 Alarm Setting
4.2.5 Warning Volume Setting
NOTE:
When in the scan mode, the monitor unit will stop
scanning and alert you if one of the camera unit is out of
range or is not powered on.
This controls the volume of an audio 'beep' sound from the
monitor unit to alert you when the unit is low on battery or out
of range.
1. Press the MENU button and the menu bar will show.
2. Press the LEFT button or RIGHT button until the
warning volume icon is highlighted.
4.2.4.4 Scan Camera
1. Press the MENU button and the menu bar will show
2. Press the LEFT button or RIGHT button until the
cam icon is highlighted and the del/add/view/scan menu
will show.
3. Press the UP button or DOWN button to select the
scan icon, and press the OK button to confirm.
4. The screen will display the video from different paired
cameras in a loop of cam 1/ cam 2/cam 3/ cam 4, changing
every 10 seconds.
This function automatically cycles through your paired camera
channels to display each for 10 seconds. This function is only
applicable if you have more than 1 camera unit.
4.2.6 Calendar Setting
4.2.7 Temperature Unit Setting
3. Press the UP button or DOWN button to select high
/ low / OFF.
1. Press the MENU button and the menu bar will show.
2. Press the LEFT button or RIGHT button until the
calendar icon is highlighted,and the calendar will show.
3. Press the OK button to start changing the date.
4. Press the LEFT button or RIGHT button to select
the date and the time.
5. Press the UP button or DOWN button to set the
date and time, press the OK button to confirm.
The Baby Monitor in the box is designed to meet the
requirements for exposure to radio waves established by the
Federal Communications Commission (USA).
These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this
standard during product certification for use when properly
worn on the body is 1.098W/kg.
1. Press the MENU button and the menu bar will show.
2. Press the LEFT button or RIGHT button until the
temperature icon is highlighted.
3. Press the UP button or Down button to select
between or , and press the OK button to confirm.
C
F
5.Customer Service
Call Us
Warranty
Should you have any questions, please feel free to contact us
via our official email address:
(US) [e-mail]
(EU) [e-mail]
We guarantee 12 months warranty and professional after-sale
service within 24 hours.
time
FCC-SAR/Exposure
The Baby Camera in the box complies with FCC radiation
exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a
minimum distance of 20cm between the radiator & your body.
This transmitter must not be co-located or operating
inconjunction with any other antenna or transmitter.